Case Colt Ingersoll Tractors banner
446
1-12 of 29 Results
  1. Onan Engines
    I had problems with my starter a while back so I took it out cleaned it and lubed it and it worked a couple times. Now it just whirs without engaging the flywheel unless I hold the key on for up to a minute. Sometimes it works and sometimes it doesn't. I don't use it much in the summer, usually...
  2. Case Colt Ingersoll Tractors
    I bought an Ingersoll 4016 this past summer, and like everyone else (or so it seems), I've been looking to add more utility by adding more options ever since. I recently came upon a 1985 446 that had lost it hydraulics, and wasn't running, but did have a 54" blade, wheel weights, and a sleeve...
  3. Case Colt Ingersoll Tractors
    Pictures posted to my smugmug page. https://kblackav8or.smugmug.com/Machines/Case-446/ If you like machinery and equipment, browse around I have lots of pictures of other stuff up. So far I have only brought it home and adjusted the left hand screw on the carb which was like 5 or 6 turns out...
  4. Case Colt Ingersoll Tractors
    Got my engine issues sorted (by having the engine replaced) but now I'm having trouble starting and running. Here's what I think I see: 1.) Battery was flat dead when I got the tractor out of the barn this spring. Started with jump. 2.) Engine surges when idling and over time starts to chuff...
  5. Case Colt Ingersoll Tractors
    Hello everyone, I havent posted anything on here in a very long time but now I have a reason too! So I own a 1981 case 446 tractor, have owned it for around 2 years. I use it primarily for snow removal and hauling firewood. Well sadly this fall the surprisingly tough Onan Engine died on me. A...
  6. Case Colt Ingersoll Tractors
    Thanks in the advance for any/all advice! Pro/cons of a 446 vs 4016? I plan on mowing, blowing snow, and would maybe like to get a yard vac system. Specifically: engine reliability price/availability of implements finding parts Given the choice, which route would you go?
  7. NEW MEMBER Introductions
    I recently purchased this refurbished 1985 Case 446 with a rebuilt Onan 18 hp. from Case Tractor Hobbiest, Rober Des Jardin, South Lyon Michigan. For the most part, the geographical history of this tractor has kept it in the State of Michigan. I think Bob Des Jardin did a great job on...
  8. NEW MEMBER Introductions
    Hi there! On my way to a job today I spotted this Case 446 for sale on the side of the road. Part of what I do requires towing stuff through yards, fields and woods and I recently lost access to the Massey Ferguson 35 I'd been using. That tractor was too big for a lot of jobs anyway, so big...
    446
  9. Case Colt Ingersoll Tractors
    Greetings, last fall I purchased a 1977 446 (with rotary mower). The tractor was stored in my garage all winter. Last month (April) I changed the fluids, installed the mower and cut 2 acres. No problems. Today I had plans to cut 5 acres and the engine would not start. Battery holds a charge, but...
  10. Case Colt Ingersoll Tractors
    After having a 446 with no PTO for many years I finally have a 4018 with a rear PTO and I'm looking for a splitter. Since it seems like the Case splitters are as rare as hens teeth around here I have been looking for other options. I found a used splitter with no engine or pump that has a 4in...
  11. NEW MEMBER Introductions
    Hello all, I just joined up and I feel like I just dove into the deep end of the Case, Colt, Ingersoll world. My father had a 1970’s Case 446 since the early 80’s which I inherited along with the job of doing all the lawn and garden work. A few months ago the Onan engine gave out with a broken...
  12. Case Colt Ingersoll Tractors
    All right guys, I'm going to stir up some debate here. I have a Case 446 with the original Onan engine in it. It's been sitting for 20+ years, is covered in oil, and doesn't appear to have been very well maintained. I've partially disassembled the engine, and the cylinder walls do look decent...
1-12 of 29 Results
Top