The video showed that you had the turf rolling over very nicely. It's one of those things that you just have to play with to figure it out. You have it dialed in nicely IMO. Thanks for posting.
✌ Harry
✌ Harry
10" Simplicity Moldboard Plow Retrofit
Hello friends!
Anyone here have experience with one of these? From my research it appears to be of at least 1962 vintage.
![Wood Grass Triangle Road surface Font]()
![Road surface Asphalt Grass Wood Tints and shades]()
My friend gave it to me for free and I'm going to retrofit it for use on my 4016 with a 3-point drawbar. I'm curious how they perform, if shares and moldboards are still available, etc.
![Wheel Tire Automotive tire Vehicle Motor vehicle]()
![Tire Wheel Vehicle Automotive tire Car]()
This is my first time messing with a plow and I've done extensive research but still need some pointers. Thanks to dundee222 for giving me some already on my other thread on the tractor itself!
A member on the Deere forum did this retrofit already and I'm doing something similar to his but instead of clamping it directly on the drawbar with a plate, I'm going to use a clamp-on 2" receiver with a 2" square tube hitch on the plow to move it where I need it in relationship to the inner edge of the rear tire. This way I can move the receiver back to center for moving trailers or attaching other implements offset if needed - think of it as a universal tool bar of sorts.
![Tire Wheel Automotive tire Tread Vehicle]()
I threw the plow up on my workbench and leveled the beam horizontally and vertically and it looks like the landing setting is off as though to steer the plow towards the left rear tire. There is no landing adjustment so I checked it out a little closer and it appears that the two pieces of the frog were broken apart and welded back together sometime in the past. The moldboard wing of the frog has a big overlap over the landslide wing and caused the landslide to not sit flat against the frog (notice gradually increasing gap between the two the below pics).
![Automotive tire Asphalt Motor vehicle Road surface Hood]()
![Automotive tire Wood Road surface Asphalt Tints and shades]()
I figured I'd rather fix it now than attempt plowing with it as-is and risk fighting it the whole time so I blasted it apart and took it to work for sandblasting and surface finishing.
![Automotive tire Asphalt Cuisine Cooking Gas]()
Am I chasing something that isn't a problem? Has anyone ever added a landing adjustment to a plow that's never had it?
Thanks all!
Anyone here have experience with one of these? From my research it appears to be of at least 1962 vintage.
My friend gave it to me for free and I'm going to retrofit it for use on my 4016 with a 3-point drawbar. I'm curious how they perform, if shares and moldboards are still available, etc.
This is my first time messing with a plow and I've done extensive research but still need some pointers. Thanks to dundee222 for giving me some already on my other thread on the tractor itself!
A member on the Deere forum did this retrofit already and I'm doing something similar to his but instead of clamping it directly on the drawbar with a plate, I'm going to use a clamp-on 2" receiver with a 2" square tube hitch on the plow to move it where I need it in relationship to the inner edge of the rear tire. This way I can move the receiver back to center for moving trailers or attaching other implements offset if needed - think of it as a universal tool bar of sorts.
I threw the plow up on my workbench and leveled the beam horizontally and vertically and it looks like the landing setting is off as though to steer the plow towards the left rear tire. There is no landing adjustment so I checked it out a little closer and it appears that the two pieces of the frog were broken apart and welded back together sometime in the past. The moldboard wing of the frog has a big overlap over the landslide wing and caused the landslide to not sit flat against the frog (notice gradually increasing gap between the two the below pics).
I figured I'd rather fix it now than attempt plowing with it as-is and risk fighting it the whole time so I blasted it apart and took it to work for sandblasting and surface finishing.
Am I chasing something that isn't a problem? Has anyone ever added a landing adjustment to a plow that's never had it?
Thanks all!
