[Jandy]

I need HELP! I purchased a 1983 Case 446 last year and just bought a HH34 3 pt hitch for it. The attachment reference chart from Ingersoll shows this should work but after just taking a few minutes to look it over (I just got it) it doesn't look oike everything lines up. Am I missing something?

Thanks,

Jeff

 

[markgru02919]

Jeff, I am not sure what you mean by everything is not lining up. Below is a link to the manual for the hitch that should give you an idea if you have everything. The 3 point hitch mounting plate attaches by 2 vertical bolts going into the transaxle and the 2 bolts going through the trailer hitch.

http://www.manuals.casecoltingersoll.co ... marked.pdf

 

[Hydriv]

The HH-34 hitch will mount onto the 400 Series tractors but if you have a hydraulic PTO valve back there, you have a clearance problem with left side of the hitch's crank lever that lifts the lower arm on the left side.

 

[bhildret]

Also possible you have the hitch configured for mounting to a 200/3000. The manual pointed out mentions it there in step 4B ...

Brian

 

[Caseman2]

Wow Hilda whatever facial cream your using... its working! :mrgreen: