Case Colt Ingersoll Tractors banner
1 - 10 of 10 Posts

· Banned
Joined
·
12,618 Posts
Ted Miller said:
I am going to be doing some hydraulic work on the 646LBH and will be draining the system, will be putting 15W40 back in. Does any one knows how much I would need?

Thanks,
Ted
As much as it needs. :sidelaugh: :sidelaugh:

It's funny that you should ask that question because I'm in the process of creating a FAQ that speaks to this issue. I just asked Brian if he had a chart for bone dry fill amounts as well as the amount needed for routine oil changes and the answer was no. I am OK for all the GT's but I have no info for any of the 600, 6000 and 7000 series tractors that are either loaders or loader/hoe models.

Operator Manuals should reveal this info so if any of you guys have one or more of these manuals, please help us out.
 

· Registered
Joined
·
160 Posts
Discussion Starter · #4 ·
Hydriv said:
Ted Miller said:
I am going to be doing some hydraulic work on the 646LBH and will be draining the system, will be putting 15W40 back in. Does any one knows how much I would need?

Thanks,
Ted
As much as it needs. :sidelaugh: :sidelaugh:

It's funny that you should ask that question because I'm in the process of creating a FAQ that speaks to this issue. I just asked Brian if he had a chart for bone dry fill amounts as well as the amount needed for routine oil changes and the answer was no. I am OK for all the GT's but I have no info for any of the 600, 6000 and 7000 series tractors that are either loaders or loader/hoe models.

Operator Manuals should reveal this info so if any of you guys have one or more of these manuals, please help us out.
Tom, I sent you the manual for the 646 a couple of months ago, to be downloaded, not in the files, I didn't get it back. What happened to it?

Ted
 

· Registered
Joined
·
2,546 Posts
Hydriv said:
Bart said:
13 qts total, 8 qts refill as noted in the manual in the tech section. Tom, you should have been able to find it! :sidelaugh:
Bart,
You have to take pity on me. I'm just a newbie. Which manual did you find that information?
It's in 8-60680 which is listed in the tech system but it appears someone forgot to upload it. I'm not naming names but I know you have a copy.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top