Case Colt Ingersoll Tractors banner

B-43 oil pressure question

1798 Views 2 Replies 3 Participants Last post by  boomers_influence
I see that there is tapped hole ( 1/8th npt) on the oil filter adapter.
Any reason I can`t utilize this for an oil press gauge or idiot light ?
Seems straightforward to me, but I`ve been wrong so many times I thought I`d ask.

Thanks :wave:
1 - 3 of 3 Posts
99flhr said:
I see that there is tapped hole ( 1/8th npt) on the oil filter adapter.
Any reason I can`t utilize this for an oil press gauge or idiot light ?
Seems straightforward to me, but I`ve been wrong so many times I thought I`d ask.

Thanks :wave:
99

I think you are right :thumbsup: But I'd wait for another reply. :sidelaugh: :sidelaugh: :sidelaugh:
99
the port can be used for both.
some even add a murphy switch.(oil press. must be confirmed, to get voltage to the coil.
thank you boomer (the used onan engine parts guy)
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top