Case Colt Ingersoll Tractors banner

Carb cleaning, any need to know info ??

1392 Views 3 Replies 4 Participants Last post by  mikebramel
I ran my Ingy 446 out of gas and must have sucked some dirt into the carb as it ran great, now stumbles and sputters. Is there anything special about these carbs that I need to know before I take it off and apart ?

Thanks for help guys.
1 - 1 of 4 Posts
An offset 12 pt wrench can allow you to leave the manifold in place and remove only the 2 bolts in the carb base.
Do not accidentally reverse the placement of the two bleed screws ( it`s been done)
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.