Case Colt Ingersoll Tractors banner
1 - 12 of 12 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Hello guys,

I have a 1981 446… The choke cable retainer clip is broken. And which I am now tried removing the air cleaner lid off and manually pulling the choke on to start this tractor. I have seen some guys put screws through the bottom of air cleaner housing into the broken clip to try and hold the choke cable in place…that seem SO SO tacky. :facepalm: :thumbdown:





I have contacted Brian @ Salem Power Equipment to order this part. I want to thank Brian for all his efforts on trying to locate one for me but this part was discontinued by Ingersoll and Onan. He was even unable to get one from his other sources or networks of dealers.

He suggested going on one of the many great forums out there. And see if there is anyone that has a good used one and would be willing to sell it? My thought was to try this forum first. :headscratcher:

I am looking for part C20407 RETAINER - choke cable as per the clip from page 5 in Parts Catalog No. B-1242.



So is there anyone that has one of these clips and would be willing to sell it to me?

This would be most appreciated!

Thanks
Darrin

.
 

·
Registered
Joined
·
21 Posts
Plastic zip tie might get you by till you locate one.Try Joes Outdoor Power on E-Bay.Browse all makes ,not just Case.Probably used on another manufacturers machine,or something that will work.Good luck.Kevin
 

·
Registered
Joined
·
122 Posts
Kase446 said:
Hello guys,

I have a 1981 446… The choke cable retainer clip is broken. And which I am now tried removing the air cleaner lid off and manually pulling the choke on to start this tractor. I have seen some guys put screws through the bottom of air cleaner housing into the broken clip to try and hold the choke cable in place…that seem SO SO tacky. :facepalm: :thumbdown:





I have contacted Brian @ Salem Power Equipment to order this part. I want to thank Brian for all his efforts on trying to locate one for me but this part was discontinued by Ingersoll and Onan. He was even unable to get one from his other sources or networks of dealers.

He suggested going on one of the many great forums out there. And see if there is anyone that has a good used one and would be willing to sell it? My thought was to try this forum first. :headscratcher:

I am looking for part C20407 RETAINER - choke cable as per the clip from page 5 in Parts Catalog No. B-1242.



So is there anyone that has one of these clips and would be willing to sell it to me?

This would be most appreciated!

Thanks
Darrin

.
Is the Case# C20407 choke retainer clip the same as an Onan# 518-0328?

Is there a cross reference between the Case p/n and the Onan p/n?
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #7 ·
boomers_influence said:
darrin
brian e/mailed me about this on 1 27 11
you apparently did not see the link, that he sent to you.
of course i have the part you want.
send your address and it is yours for FREE
all i ask is that you PAY it forward some day.
thank you. boomer
:facepalm: :facepalm:

Thanks guys for all the helpful information.

Boomer Thank you ever so much…will do…I will pay it forward some day. It is good to see that there are real good people still willing to help their neighbours out left in this ever changing world of ours. :thumbsup:

Sorry…I did see that link from Brian…this getting old is for the birds…you soon forgot more then you learn. I will be sending you my address via email.

Cheers
Darrin

.
 
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top