Case Colt Ingersoll Tractors banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
Bought a 79 446 with deck and plow but I am looking at add a sno-caster and tiller soon and hoping for many other attachments in the future. I am a tinkerer-er-er... :wtf: and capable but will need a lot of questions answered since I have NO experience with tractors or hydraulics.


This does look like the best source for technical help of the forums I have checked, so thanks in advance to all!
 

·
Registered
Joined
·
1,648 Posts
Welcome! :trink:

You're right, it doesn't get any better than this. The best place to start is the Technical Library. Check the PIN number on your tractor first, so you know which manuals apply. The FAQs are invaluable. Then, if anything is unclear, just ask. No matter what your problem, someone here has seen it before.
When you need parts, talk to Brian. He'll either get you what you need - fast - or he'll tell you where to go (no pun intended :lolno: ).
 

·
Administrator
Joined
·
8,002 Posts
Chrvasil: Welcome to the Forum, we're glad you joined! :usa: :usa: :usa: This is the place for anything and everything regarding CCI tractors. In addition to researching the Technical Library and FAQs I would recommend purchasing an operators manual for your tractor if it didn't come with one. It a good thing to have on hand and you can get one from Brian or the other dealers. Also recommend that you check in with the group on the snow caster when you locate one to make sure it is correct for your tractor.
:222: :446: Best Regards, Rich
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top