Case Colt Ingersoll Tractors banner
1 - 20 of 23 Posts

·
Registered
Joined
·
2,348 Posts
Snot

That's a good set of plans and now they have a home and you will no longer have to mail them out. :thumbsup:

Stewart
 

·
Site Founder
Joined
·
3,601 Posts
Discussion Starter · #4 ·
I wish I could remember the guys name who sent them to me. I think Drew might know who it is as he had more correspondence with him than I did.
 

·
Banned
Joined
·
1,373 Posts
The gentleman's name is Sam, I met him while at the yahoo group, not sure but I think he is from Indiana, could be wrong about that but I still have the complete set of emails and files on my harddrive as well. Very nice gentleman, full of good advice and encouragement.

Included were several detailed drawings of the individual parts, as well as the pics you see here and the 3D cad stuff in the link. Let me know if you have those as well Chuck and if not, I will forward them to you via email.
 

·
Registered
Joined
·
323 Posts
Well, if we want to get technical, Sam didn't draw that set of "plans"......

A guy they call grummy did, and they were originally posted in the yahoo forum by cut_cl42, which is grummys yahoo account log-in. The 2d portions were drawn in autosketch and the 3d rendering in rhino.

your welcome <G>
 

·
Site Founder
Joined
·
3,601 Posts
Discussion Starter · #7 ·
Thanks for clearing it up. I couldn't remember the guys name who sent them to me.

They have sure helped a lot of people Grummy!!! :thumbsup:
 

·
Banned
Joined
·
12,618 Posts
grummy said:
Well, if we want to get technical, Sam didn't draw that set of "plans"......

A guy they call grummy did, and they were originally posted in the yahoo forum by cut_cl42, which is grummys yahoo account log-in. The 2d portions were drawn in autosketch and the 3d rendering in rhino.

your welcome <G>
Hmmmmm. I'm trying to recall who it was that submitted photos of his hitch along with various dimensions so that you could make that fantastic drawing.

Any ideas who that might have been, Grummy? :trink:
 

·
Registered
Joined
·
6 Posts
I did not draw up the auto cad plans. I don't know who did, they were sent to me along with some other plans a few months back and I just passed them along. Hope I didn't do anything wrong in doin so, if I did I apolize for the mistake. Sam
 

·
Registered
Joined
·
323 Posts
Hydriv said:
Hmmmmm. I'm trying to recall who it was that submitted photos of his hitch along with various dimensions so that you could make that fantastic drawing.

Any ideas who that might have been, Grummy? :trink:
Well, it couldnt have been you.... I've been told that you probably dont even have any Case garden tractors !
 

·
Banned
Joined
·
12,618 Posts
gekapunch said:
I did not draw up the auto cad plans. I don't know who did, they were sent to me along with some other plans a few months back and I just passed them along. Hope I didn't do anything wrong in doin so, if I did I apolize for the mistake. Sam
The AutoCad plans were drawn by a guy that goes by the screen name "Grummy". He is a member of this forum as well as a few others. He did those plans in conjunction with dimensional information provided be me when I was a member of the Case forum on Yahoo.

No....you did not do anything wrong. Grummy placed those plans on the Yahoo forum and they were accessible to anyone who wanted them. All that happened here is that someone mistakenly attributed those plans to you but that's Grummy's fault for not putting his name on them to show that they were created by him. :sidelaugh:

Therefore......not your problem. :thumbsup:
 

·
Banned
Joined
·
12,618 Posts
grummy said:
Hydriv said:
Hmmmmm. I'm trying to recall who it was that submitted photos of his hitch along with various dimensions so that you could make that fantastic drawing.

Any ideas who that might have been, Grummy? :trink:
Well, it couldnt have been you.... I've been told that you probably dont even have any Case garden tractors !
That's very understandable.

I've also been told that I don't even exist.
 

·
Registered
Joined
·
877 Posts
Tried to use link in first post to look at drawings but got a message that said the link is broke. This is with Google Chrome. IE at work 404'd me. :???:
 

·
Site Founder
Joined
·
3,601 Posts
Discussion Starter · #19 ·
It was broken but I fixed it. :cool:

I moved it months ago when I organized our manuals on the server. :thumbsup:


The link in the first post has changed. The link you quoted is still broken.
 

·
Registered
Joined
·
172 Posts
Snotrocket said:
It was broken but I fixed it. :cool:

I moved it months ago when I organized our manuals on the server. :thumbsup:

The link in the first post has changed. The link you quoted is still broken.
I can now access the link, but it appears in portrait format and the layout of the pdf seems to be in landscape. I am losing approx. the right 1/3 of each page. Maybe I'm doing something wrong?
 
1 - 20 of 23 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top