[mryeti117]

Have you read this section? page 8-2, it does show a way of checking roughly if you're motor is close to the timing points?
Although, it is preset, you can check to see if you're in the range where it should be,, check this out and see if it's close.
You didn't replace the cam shaft or crankshaft? Just had the gears off? Any pictures of the gear positions during assembly?

https://www.casecoltingersoll.com/d3/manuals/ServiceManuals/Onan%20Service%20Manual%20965-0762_watermarked.pdf

Found my problem @Lionel Need a new woodruff key i think i installed it backwards 🤦such a rookie mistake

 

[Lionel]

Great, now you can move forward with your motor. I suspect, that's been known to happen before,, the important part is you got it figured out without too much disassembly, (hopefully)

 

[mryeti117]

Great, now you can move forward with your motor. I suspect, that's been known to happen before,, the important part is you got it figured out without too much disassembly, (hopefully)
Yep fun part will be getting that key seems no one has them in stock gonna try Boomer in the morning if my guy doesn't come thru

 

[mryeti117]

Success she fired right up! When I can figure out how to post a video on here I will thanks to everyone who helped me along this journey

 

[Gordy]

Success she fired right up! When I can figure out how to post a video on here I will thanks to everyone who helped me along this journey

Click on the 3 stacked dots in the top right corner and select FAQ. There are instructions there for uploading videos.

Cheers,
Gordy

 

[mryeti117]

Thanks @Gordy I'll get some better videos to post later