Can you show us a pic of your setup? And a pic of the mule drive?
Sent from my SM-S906U using Tapatalk
Sent from my SM-S906U using Tapatalk
S-84 Snowblower/caster Question
During the rebuild of my S-84 (the drive has been fixed to work with my 448), I flipped the "cutting edge" on my snowblower. Ever since then, I get snow buildup during removal ops. The snow doesn't get sucked into the housing to be thrown out the chute. When in float, the blower housing is resting on the skids and the lip is in VERY light contact with the ground (skids are holding the weight).
Also, I tried a 1/2 rubber lip under the worn side of the cutting edge, but that didn't do anything.
Does anyone have an idea as to why the snow is building up in front of the machine (so it acts more like a plow) and what the fix may be?
Also, I tried a 1/2 rubber lip under the worn side of the cutting edge, but that didn't do anything.
Does anyone have an idea as to why the snow is building up in front of the machine (so it acts more like a plow) and what the fix may be?
1 - 3 of 17 Posts
Hydro... check your belt. It appears to be installed wrong. Look at the belt routing diagram. That should fix your issue. Your auger is spinning the wrong way.
Sent from my SM-S906U using Tapatalk
Sent from my SM-S906U using Tapatalk
Well I tried. Lol, I zoomed in more and now see you got it right. But first glance without zooming in on the pics, the belt looked routed wrong.
Sent from my SM-S906U using Tapatalk
Sent from my SM-S906U using Tapatalk
1 - 3 of 17 Posts
Case Colt Ingersoll Tractors
A forum community dedicated to Colt, Case and Ingersoll tractors owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!
Full Forum Listing
Explore Our Forums
