Case Colt Ingersoll Tractors banner

S-84 Snowblower/caster Question

623 Views 16 Replies 6 Participants Last post by  Gordy
During the rebuild of my S-84 (the drive has been fixed to work with my 448), I flipped the "cutting edge" on my snowblower. Ever since then, I get snow buildup during removal ops. The snow doesn't get sucked into the housing to be thrown out the chute. When in float, the blower housing is resting on the skids and the lip is in VERY light contact with the ground (skids are holding the weight).

Also, I tried a 1/2 rubber lip under the worn side of the cutting edge, but that didn't do anything.

Does anyone have an idea as to why the snow is building up in front of the machine (so it acts more like a plow) and what the fix may be?
1 - 1 of 17 Posts

The edge in your picture is part of the housing itself, not part of the cutting edge. Mine has the same thing and when the cutting edge is installed properly, the unused edge fits snug in that curve of the housing.
Yep thats what I saw when I checked mine out today. I could not see the unused edge in your picture so had to look at mine.

  • Like
Reactions: 2
1 - 1 of 17 Posts