Case Colt Ingersoll Tractors banner
1 - 3 of 3 Posts

·
Banned
Joined
·
12,618 Posts
Sheridan,


Your 224 will have the Snap Fast mounting pins on the front of the frame that allows you to quickly connect attachments such as decks, blades and blowers. You can choose between a 38" or 48" wide blower because you have 14 HP under the hood. Any H, J, K, L, M, N, O, P, R or S Series snowcaster will work for you. If you want the 38" wide model, then a J-80 snocaster would be the correct Model Number but so would a H-80 or a S-80 or any other letter in-between. If you want the wider 48" model, the a K-84 or M-84 will do the track but so will any other letter from H through S.


You do not want a snowblower model that starts with the letters SB because those are for the 3000/4000 Series Ingersolls. Also... do not buy other snow blowers with numbers that are different than 80 or 84 because those are for Lawn Tractors.

You could put a Wanted To Buy ad on the bulletin board here.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top