Case Colt Ingersoll Tractors banner
1 - 6 of 6 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter · #1 ·
How much differences are there from 155-195 to 73 444. I was going to order bearings a while back and Brian informed me that the bearings are different. My 195 has a bad tire and I have an assortment of rims and tires. Two of the rims seem to be 3/4. Just curious. Thanks, Bill Gebhardt
 

·
Banned
Joined
·
12,618 Posts
The 155/195 models use C-12110 as the INNER bearing and C12111 as the outer bearing. This continued with the early 200 and 400 models but at some point, Case went with the C12111 bearing for both the inner and the outer. Off hand, I can't tell you what the difference is. Only that there is a difference.

Also, rims on the early 100 Series tractors were narrower than the ones used on 200/400 models because they went with flotation-style turf tires. It's not quite as simple as you might think.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top